……………. System Status………………
Codes Found 1
Monitors N/A 4
Monitors OK 3
Monitors INC 3
15
4.1 Reading Codes
1) Use SCROLL button to select Read Codes from Diagnostic
Menu and press ENTER/EXIT button.
.............Diagnostic Menu..........
1/6
► 1) Read Codes
2) Erase Codes
3) View Freeze Frame
4) I/M Readiness
z If more than one module is detected, you will be prompted
to select a module before test.
………………Control Module……………
1/3
► Engine
Module $A4
Exit
z Use SCROLL button to select a module, and press
ENTER/EXIT button.
2) View DTCs and their definitions on screen.
To Next Page
Loading...
