Autel MaxiScan MS309 - Exiting OBDII Test

4.6 Exiting OBDII Test
1) To exit OBDII test, use SCROLL button to select Exit from
Diagnostic Menu and press ENTER/EXIT button.
............Diagnostic Menu... ........
6/6
5) Vehicle Info.
►6) Exit
24
2) A warning message comes up asking your confirmation.
……………… Exit Test…………………...
Exit OBDII Test!
Are you sure?
YES NO
3) If you do want to exit OBDII test, press ENTER/EXIT button.
z If you do not want to exit, use SCROLL button the select
NO and press ENTER/EXIT button to return.