Autel MaxiScan MS309 - Page 22

……………..I/M Readiness……………..
1/3
► Since DTCs Cleared
This Drive Cycle
Exit
21
4) Use SCROLL button to view the status of the MIL light (“ON” or
“OFF) and the following monitors:
z Misfire monitor -- Misfire monitor
z Fuel System Mon -- Fuel System Monitor
z Comp. Component -- Comprehensive Components Monitor
z EGR
-- EGR System Monitor
z Oxygen Sens Mon -- O2 Sensors Monitor
z Catalyst Mon
-- Catalyst Monitor
z EVAP System Mon -- Evaporative System Monitor
z Oxygen Sens htr --O2 Sensor Heater Monitor
z Sec Air System -- Secondary Air Monitor
z Htd Catalyst
-- Heated Catalyst Monitor
z A/C Refrig Mon -- A/C system Monitor
………..Since DTCs Cleared…………..
1/3
MIL Status OFF
Misfire Monitor OK
Fuel System Mon. OK
Comp. Component OK
5) If the vehicle supports readiness test of “This Drive Cycle”, a
screen of the following will be displayed:
………….This Drive Cycle……………..
1/3
MIL Status ON
Misfire Monitor OK
Fuel System Mon OK
Comp. Component OK