36/83
IT EN FR DE ES
GENERAL DESCRIPTION
The "MODULA" project was designed to meet the needs of those people who cannot or do not want to use a compressor
driven by the vehicle’s thermal motor. All that is required is to have a 12V / 24V electric power outlet.
It is modular since it is possible to choose among various combinations: complete assembly, moto-condensing assembly
or moto-compressor assembly; the positioning of these components is, therefore, diversied and exible, also thanks to
the possibility of coupling dierent evaporators and/or condensers.
The eld of applications widens considerably: various types of special vehicles, electrical, hybrid, farming, earth-
moving, cranes, cabins, ...
Complete assembly
The complete assembly is a cooling unit which only requires installation and electrical connections in order to work.
It is suitable for cooling medium and small environments like manoeuvring cabins.
The assembly contains all the cooling unit elements: electrical compressor, condenser, dehydrating lter, expansion valve,
evaporator. It is also available in the heating version that integrates an electric heater with resistances. It is also supplied
with an air diuser and with controls, which can be located on the diuser or in another remote location. It is pre-loaded
with R134a.
TECHNICAL DATA
Power supply
12 V cc
24 V cc
Cooling capacity 3 kW
Heating capacity 0,95 kW
Power consumption (cooling)
80 A @ 12 V
40 A @ 24 V
Power consumption (heating)
90 A @ 12 V
45 A @ 24 V
Air ow *
* (static pressure = 0 Pa)
550 m³/h
Coolant R134a
Amount of coolant 600 g
Weight (only cooling version) 28 kg
Weight (cooling/heating version) 30 kg
To Next Page
Loading...
