9
7. Route the antenna lead down the A pillar to where the
AutoDAB GO-S is to be mounted. Ensure you do not trap
any leads as you go.
Do not attach the DAB antenna above heater wires, in a location
which would obstruct the view of the driver, or in a location that
would receive interference from metal. For your safety, do not run
cables so that they interfere with operation of the vehicle, or through
a location that would interfere with the function of the airbags.
8. Check for metallic heat coating (sun filter) or heated front
windscreen as this will effect antenna operation. Antenna
should be mounted away from these items.
To Next Page
Loading...
