MultiGrow Installation Guide
V2.0 MultiGrow Installation Guide Copyright© 2018 Autogrow Systems Ltd 14
Environment Sensor Module
The Environment Sensor Module allows readings of the environment to be
measured and sent back to the controller to determine reactive decisions to
control the climate devices. Factors such as temperature, relative humidity and
Solar PAR can be measured on the standard environment sensor. CO
2
can also
be measured on the PRO Environment Sensor.
There are two methods of mounting and installing the Environment Sensor
Module, details are included in the Appendix.
The diagram below shows the Bus Network connections on the Environment Sensor Module, wiring
diagrams are also available in the Appendix.
To Next Page
Loading...
Need help?
General