AUTOHELM ST 50 plus - Track Control Features

Track Control
Selecting a Target Waypoint
Once the latitude and longitude of a waypoint has been entered, or a sail
plan has been set up, the waypoint can then be selected as a target
waypoint :
1 .

Press TRACK to display waypoint information .
2 .

Display the intended target waypoint number
(LAT
or
LONG) using
V or ^ .
Note : If the sail plan is selected, the first waypoint
will automatically be
displayed .
3 .

Press
TRACK to select track control .
This defines a track from the current position to the displayed waypoint .