Need help?Do you have a question about the AUTOHELM ST 50 plus and is the answer not in the manual?
Details recommended placement criteria for the ST50 Plus GPS/Navdata unit for optimal readability and protection.
Step-by-step instructions for physically mounting the ST50 Plus GPS/Navdata unit onto a bulkhead.
Explains bracket and flush mounting methods for the ST50 Plus GPS/Navdata unit.
Details stand-alone and SeaTalk system power supply connections for the ST50 Plus GPS/Navdata.
Instructions for connecting separate instruments using SeaTalk Extension Cables or alternative screened cable.
Guidance on establishing a second ring-main connection for power supply in systems with many instruments.
Details how to connect ST50 Plus instruments to the SeaTalk bus with a compatible autopilot.
Explains how to connect a position transducer directly or via an Autohelm Navcenter.
Provides a troubleshooting table to identify common faults, their causes, and likely solutions.
Offers advice on maintaining the instrument, transducer, and cabling, including cleaning and checking.
Explains how to cycle through various data displays (Position, COG/SOG, Tide, Waypoint) using the DISPLAY key.
Details setting up, selecting target, and advancing through waypoints for navigation.
Explains how to select and arrange up to 10 waypoints to create a sail plan for navigation.
Guides on selecting target waypoints, defining tracks, and managing track control for navigation.
Details Man Overboard and Anchor Watch functions for safety and security.
Describes Dead Reckoning mode for lost signal and integration with Autopilots and Navcenters.
Guides on setting position corrections and adjusting display contrast for optimal legibility.
Introduces the anti-theft 'CODE Lock' feature, its purpose, and its three operating modes.
Guides through initial setup: operating mode, data format, variation, and time corrections.
Covers intermediate calibration: software version, Code Lock security setup, and storage.
Details advanced calibration: on/off lock, damping settings for various data, and boat show mode.
Provides technical specifications: dimensions, power supply, consumption, temperature, display, and computer.
Details recommended placement criteria for the ST50 Plus GPS/Navdata unit for optimal readability and protection.
Step-by-step instructions for physically mounting the ST50 Plus GPS/Navdata unit onto a bulkhead.
Explains bracket and flush mounting methods for the ST50 Plus GPS/Navdata unit.
Details stand-alone and SeaTalk system power supply connections for the ST50 Plus GPS/Navdata.
Instructions for connecting separate instruments using SeaTalk Extension Cables or alternative screened cable.
Guidance on establishing a second ring-main connection for power supply in systems with many instruments.
Details how to connect ST50 Plus instruments to the SeaTalk bus with a compatible autopilot.
Explains how to connect a position transducer directly or via an Autohelm Navcenter.
Provides a troubleshooting table to identify common faults, their causes, and likely solutions.
Offers advice on maintaining the instrument, transducer, and cabling, including cleaning and checking.
Explains how to cycle through various data displays (Position, COG/SOG, Tide, Waypoint) using the DISPLAY key.
Details setting up, selecting target, and advancing through waypoints for navigation.
Explains how to select and arrange up to 10 waypoints to create a sail plan for navigation.
Guides on selecting target waypoints, defining tracks, and managing track control for navigation.
Details Man Overboard and Anchor Watch functions for safety and security.
Describes Dead Reckoning mode for lost signal and integration with Autopilots and Navcenters.
Guides on setting position corrections and adjusting display contrast for optimal legibility.
Introduces the anti-theft 'CODE Lock' feature, its purpose, and its three operating modes.
Guides through initial setup: operating mode, data format, variation, and time corrections.
Covers intermediate calibration: software version, Code Lock security setup, and storage.
Details advanced calibration: on/off lock, damping settings for various data, and boat show mode.
Provides technical specifications: dimensions, power supply, consumption, temperature, display, and computer.
General| Brand | AUTOHELM |
|---|---|
| Model | ST 50 plus |
| Category | Marine GPS System |
| Language | English |
To Next Page