EasyManuals Logo

Automate AM1.5 User Manual

Automate AM1.5
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
9
© 2012 Directed. All rights reserved.
Additional Features
Nuisance Prevention Circuitry (NPC)
NPC monitors all alarm zones and, if any are triggered three times
within an hour, bypasses them until corrected. If a point of entry (trunk,
hood, door) is left open following a forced entry, it is bypassed. It be-
comes active again only after being closed.
Bypassed sensors automatically reset after one hour, and after
the vehicle is driven. Disarming then re-arming the system does not reset
bypassed sensors.
Power Save
When the vehicle is parked for an extended period, the system modi-
fies its LED output to reduce power consumption. If Armed, the flashing
is reduced after 24 hours. When Valet mode is On, the LED turns off
after one hour and resets each time the ignition is turned off.
Optional Features
Passive Arming
Exit the vehicle, after the doors are closed the passive arming count-
down begins. The LED flashes quickly and upon reaching 50 seconds
the siren then chirps once. At 60 seconds the system arms itself.
Note: You can re-enter the vehicle anytime before the system arms, and
after closing the entry point passive arming resumes.
Trunk Release (7643A remote control only)
Press and hold AUX for two seconds to open the trunk/rear hatch.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Automate AM1.5 and is the answer not in the manual?

Automate AM1.5 Specifications

General IconGeneral
BrandAutomate
ModelAM1.5
CategoryCar Alarm
LanguageEnglish

Related product manuals