Automated Logic U551 User Manual

Automated Logic Corporation • 1150 Roberts Blvd. • Kennesaw, GA 30144 • 770/429-3000 • 770/429-3001 Fax •
www.automatedlogic.com • Copyright 2002 Automated Logic Corporation. All rights reserved. Automated Logic, the
Automated Logic logo, SuperVision, Eikon, WebCTRL, Alert, and InterOp are registered trademarks of Automated Logic
Corporation. BACnet
®
is a registered trademark of ASHRAE. All other brand and product names are trademarked by
their respective companies.
Technical Instructions
U551
Using the U551 2
Specifications 2
Job Start-Up 3
Job Start-Up for WebCTRL 3
Job Start-Up for SuperVision 3
Start-Up Checklist 4
Mounting 4
Addressing 4
Power Wiring 4
Communications Wiring 5
Communicating Through the LogiStat Port 6
Input Wiring 7
Using the LogiStat 7
Digital Output Wiring 8
Analog Output Wiring 8
Using Flow Sensors 8
Writing GFBs for the U551 9
Point Identifiers 10
LEDs 11
Production Date 11

Automated Logic U551 Specifications

General

Brand	Automated Logic
Model	U551
Category	Controller
Language	English

Summary

Using the U551

Specifications

Job Start-Up

Job Start-Up for WebCTRL

Lists required drivers, Eikon software, and U-cards for U551 setup in WebCTRL systems.

Job Start-Up for SuperVision

Lists required drivers, Eikon software, and U-cards for U551 setup in SuperVision systems.

Mounting

Addressing

Power Wiring

Communications Wiring

Communicating Through the LogiStat Port

Input Wiring

Using the LogiStat

Details connecting LogiStat sensors to the U551's LogiStat port for input readings.

Digital Output Wiring

Analog Output Wiring

Using Flow Sensors

Writing GFBs for the U551

Point Identifiers

LEDS

Production Date