Automated Logic SE6166 - User Manual

Verify that you have the most current version of this document. Go to http://accounts.automatedlogic.com, then select Support >
Download > Documents > Technical Instructions.
SE6166 Controller
Technical Instructions
Rev. 4/13/2011

Summary

Understanding the SE6166 Controller

Controller Overview and Specifications

Defines the SE6166 controller, its driver, and program capabilities.

Mounting, Powering, and Addressing

Controller Mounting and Power Wiring

Instructions for physically mounting the controller and connecting its power supply.

Addressing the SE6166 Controller

Steps to assign a unique network address to the SE6166 controller using rotary switches.

Configuring SE6166 Communications

Communications Wiring Specifications

Details wire types, lengths, and shielding for BACnet ARC156 and MS/TP networks.

Setting Communication Type and Baud Rate

Instructions on setting the communication type and baud rate via DIP switches.

Wiring Inputs and Outputs

Input Wiring Specifications and Procedures

Configuring Input and Output Jumpers

Wiring Room Sensors

Downloading and Assigning Controller Functions

Downloading the SE6166 in WebCTRL

Assigning Inputs to Control Points

Assigning Outputs to Control Points

Understanding Input;Output Scaling and Calibration

Controller Configuration and Setup

Setting Up Controller Driver Properties

Device and Network Configuration

Alarm and Notification Management

Notification Class Configuration

Alarm Priorities and Recipients

Local Access Port Communication

Prerequisites and Connection Setup

Steps to connect a computer to the controller via USB for downloads and troubleshooting.

Troubleshooting the SE6166 Controller

Formatting and Error Handling

Procedures for formatting the controller and troubleshooting communication issues.

Serial Number and Battery Replacement

Troubleshooting Specific Issues

Interpreting LED Status Indicators

Serial Number and Battery Replacement

Automated Logic SE6166 Specifications