Automated Logic ZS Plus User Manual

This Rnet tag number...
Indicates this type of value...
321
Return Air Static Pressure
322
Building Static Pressure
323
OA Dampers
324
RA Dampers
325
EA Dampers
326
SA Dampers
327
Economizer
328
Time Remaining Until Transition
329
Environmental Index
330
Demand Level
400
Heating Setpoint Adjust
401
Cooling Setpoint Adjust
402
Occupied Heating Setpoint
403
Occupied Cooling Setpoint
404
Unoccupied Heating Setpoint
405
Unoccupied Cooling Setpoint
406
Occupied Humidity Setpoint
407
Unoccupied Humidity Setpoint
408
Occupied CO2 Setpoint
409
Unoccupied CO2 Setpoint
410
Minimum OA Damper %
411
Static Pressure Setpoint
412
OA Temp Cooling Lockout
413
OA Temp Heating Lockout
414
Changeover Temp
416
Air Flow Setpoint
417
Occupied VOC Setpoint
418
Unoccupied VOC Setpoint
419
Supply Air Temp Setpoint
500
Fan Speed Status
501
HVAC Zone Mode Status
600
Fan Speed Mode Request
601
HVAC Zone Mode Request
800
Temperature units (°F/°C) displayed on sensor
Rnet tag number...
Indicates this type of alarm...
1024
Generic Alarm
1025
High Zone Temp
1026
Low Zone Temp
1027
Filter Change Required
1028
High Discharge Air Temp
1029
Low Discharge Air Temp
1030
Supply Fan Failure
1031
Supply Fan in Hand
ZS Sensors ALC Proprietary and Confidential © 2015 Automated Logic Corporation
Rev. 4/27/2015 All rights reserved
10

Automated Logic ZS Plus Specifications

General

Brand	Automated Logic
Model	ZS Plus
Category	Accessories
Language	English