Automated Logic ZS Plus User Manual

Rnet tag number...
Indicates this type of alarm...
1032
Supply Fan Runtime Exceeded
1033
Exhaust Fan Failure
1034
Exhaust Fan in Hand
1035
Exhaust Fan Runtime Exceeded
1036
Supply Fan VFD Fault
1037
Cooling Coil Pump Failure
1038
Cooling Coil Pump in Hand
1039
Cooling Coil Pump Runtime Exceeded
1040
Heating Coil Pump Failure
1041
Heating Coil Pump in Hand
1042
Heating Coil Pump Runtime Exceeded
1043
High Zone CO@ Concentration
1044
High Zone Humidity
1045
Low Zone Humidity
1046
Smoke Alarm
1047
Sensosr Failure
1048
Freezestat
1049
Emergency Shutdown
1050
Compressor 1 Runtime Exceeded
1051
Compressor 2 Runtime Exceeded
1052
OA Damper Failure
1053
OA Damper in Hand
1054
Enthalpy Wheel Failure
1055
Enthalpy Wheel in Hand
1056
Enthalpy Wheel Runtime Exceeded
1057
Enthalpy Wheel High Discharge Air Temp
1058
Enthalpy Wheel Low Discharge Air Temp
1059
Enthalpy Wheel High Return Air Temp
1060
Enthalpy Wheel Low Return Air Temp
1061
Enthalpy Wheel High Exhaust Air Temp
1062
Enthalpy Wheel Low Exhaust Air Temp
1063
High Supply Air Humidity
1064
Low Supply Air Humidity
1065
High Mixed Air Temp
1066
Low Mixed Air Temp
1067
High Return Air Humidity
1068
Low Return Air Humidity
1069
High Return Air Temp
1070
Low Return Air Temp
Rnet tag numbers 1100–1999 are custom tags. If you see a number in this range, ask your system
installer what system value it represents.
A custom Rnet tag number
beginning with...
Indicates...
11xx
A binary tag
13xx
An analog tag
15xx
A multi-state tag
ZS Sensors ALC Proprietary and Confidential © 2015 Automated Logic Corporation
Rev. 4/27/2015 All rights reserved
11

Automated Logic ZS Plus Specifications

General

Brand	Automated Logic
Model	ZS Plus
Category	Accessories
Language	English