Need help?Do you have a question about the Automatic Solutions CTR50 and is the answer not in the manual?
General| Motor voltage | 24 Vdc |
|---|---|
| Max leaf length | 5 m |
| Max opening angle | 120° |
| Protection class | IP44 |
| Maximum Gate Weight | 500 kg |
| Maximum Gate Width | 5 m |
| Protection Rating | IP44 |
| Power supply | 230V AC |
Essential for a good result; double-checking measurements, tools, and site conditions.
Details bolting to existing structures, concrete installation, and notes on concrete.
Installing centre and open stops for automation functionality.
Lists motor voltage, power, speed, thrust, protection, duty cycle, dimensions, stroke, leaf size/weight, opening time.
Lists motor voltage, inputs, charger, receiver, limit switches, inputs, lock, regulator.
Step-by-step installation guide.
Periodically check fastenings, alignment, operation, and keep clean.
Details installing post and gate brackets, and gate stops for smooth operation.
Overview of board components and terminal functions for wiring.
Connect motors, input loops, antenna, set dip switches, and connect power.
Program remotes, check motor direction, and set gate work/pause times.
Explains settings for step-by-step, automatic, apartment, and single wing modes.
Details the logic for step-by-step, automatic, and apartment modes.
Explains how safety devices and commands affect gate operation.
Details various electrical connections, connectors, and terminal boards.
Lists specific connections for motors, safety devices, and accessories to the CTR50.
Diagrams for connecting single or multiple sets of safety beams.
Provides options for direct service desk contact or returning faulty products.
To Next Page