Automatic Systems TriLane TL2 - Replacing the Gear Motor Option

p. 39/46
TLxx-MT-EN-04
04
01
02
03
Fig. 37 Electro-magnet
9.2.5. replacement of a gear motor (option)
The gear motor and its support are fixed on the upper frame using two M6 x 20 bolts with hexagonal heads.
• Remove the cover
• Disconnect the power supply (main circuit breaker)
• Disconnect the motor cable
• Remove the two M6x20 bolts and locate the new gear motor with its support.
Fixing bold of the motor
assembly(2x)
Motor
Fig. 38 Fixing the motor