Chapter 5 - System Setup Screens
5-40
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Memory – Backup (cont’d)
The next system setup screen allows the verification of
the data file selections. When the OK button is pressed,
the backup begins.
The user can return to the previous screen by pressing
the << Prev button.
This message is displayed during the Backup copying
process. Press the Cancel button to abort the backup.
The following text is shown in the copying progress
message box:
Copy to USB Memory:
“Please do not Power Off and Remove USB”
Copy to SD1 or SD2:
“Please do not Power Off and Remove SD”
WARNING: During the copying process do
not power off the touch panel or remove the
memory device.
This message is displayed to indicate the Backup is
complete. Press the OK button to return to the previous
menu selection.
To Next Page
Loading...