Chapter 5 - System Setup Screens
5-45
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Memory – Restore (cont’d)
The data selected to restore is checked. If the data is
good, then the OK button can be pressed to start the
restore.
If there is a problem with the data, the OK button
will remain grayed out and the user can return to the
previous screen by pressing the
<< Prev button.
The problem could be caused by a corrupted data file.
See Chapter 8: Troubleshooting for additional help.
This message is displayed during the Restore process.
Press the Cancel button to abort the backup.
The following text is shown in the copying progress
message box:
Copy to USB Memory:
“Please do not Power Off and Remove USB”
Copy to SD1 or SD2:
“Please do not Power Off and Remove SD card”
WARNING: During the copying process. Do
not power off the touch panel or remove the
memory device.
This message is displayed to indicate the Restore
is complete. Press the OK button to return to the
previous menu selection.
To Next Page
Loading...