Do you have a question about the Autonics PSA-C01 and is the answer not in the manual?
Details PSAN models and their pressure types.
Specifies rated, display, and maximum pressure ranges for PSAN.
Procedure for setting the pressure display to zero.
Setting parameters for window comparative output mode.
Explains setting levels and hysteresis for output.
Explains automatic setting of pressure levels.
Explains independent, opposite, and cross output modes.
Explains setting low/high limits for pressure sensing.
How to select the pressure unit for display.
Explains the different control output modes available.
How to set the display value to zero.
Warning against using with corrosive or flammable gases.
Setting pressure detection levels and hysteresis.
Setting range for high/low limits.
Setting hysteresis and window comparison.
Setting pressure detection levels automatically.
Selecting the pressure unit for display.
Explains the different control output modes.
Details PSAN models and their pressure types.
Specifies rated, display, and maximum pressure ranges for PSAN.
Procedure for setting the pressure display to zero.
Setting parameters for window comparative output mode.
Explains setting levels and hysteresis for output.
Explains automatic setting of pressure levels.
Explains independent, opposite, and cross output modes.
Explains setting low/high limits for pressure sensing.
How to select the pressure unit for display.
Explains the different control output modes available.
How to set the display value to zero.
Warning against using with corrosive or flammable gases.
Setting pressure detection levels and hysteresis.
Setting range for high/low limits.
Setting hysteresis and window comparison.
Setting pressure detection levels automatically.
Selecting the pressure unit for display.
Explains the different control output modes.
| Input Voltage | 100-240 VAC |
|---|---|
| Output Voltage | 24 VDC |
| Frequency | 50/60 Hz |
| Color | Black |
| Type | Power Supply Adapter |
| Protection | Overvoltage protection |
| Compatible Devices | Autonics Controllers, Sensors, and other devices requiring 24V DC power |
| Material | Plastic, Metal |












Loading...