Autonomous Smartdesk 2 - SmartDesk 2 Assembly Steps; Step 1: Separate Crossbar Ends; Step 2: Attach Legs to Crossbar Ends

Step 1
STEP 2
Fully separate the Crossbar Ends
(P3) by using Allen Wrench to
unscrew M6x10.
You will find the Crossbar Center
Rails (P4) inside.
Place the Legs (P1) into the Crossbar
End (P3), line up the frame's and the
leg's screw holes. Firmly secure the
legs using M6x14 screws. You will
need to flip the legs to gain access to
all 4 screws.
4