Need help?Do you have a question about the Autonomous Smartdesk 2 and is the answer not in the manual?
General| Weight Capacity | 300 lbs |
|---|---|
| Frame Material | Steel |
| Adjustment Type | Electric |
| Desktop Size | 53" x 29" or 70.5" x 30" |
| Motor | Dual motor |
| Memory Presets | 4 |
| Control Type | Keypad |
| Colors Available | White, Black, Bamboo |
| Noise Level | 50 dB |
Separate the Crossbar Ends using Allen Wrench and find the Crossbar Center Rails.
Place Legs into Crossbar Ends, align holes, and secure with M6x14 screws.
Line up side brackets and secure frame to table top with wood screws.
Attach the control box to the table top using two ST4.8x19 wood screws.
Attach cable tray, plug motor cables into control box, and connect power cable.
Ensure legs are level, screws tight, then activate desk by pressing Up/Down buttons.
Unplug/replug cables, then press Up/Down simultaneously to reset height.
To Next Page
