Step 11
Attach the cable tray (if any) to the frame
using 4 M6x12 screws for the Cable tray.
Plug cables from the two motors into the
control box.
Plug the power cable into the other side
of control box.
* Note
If you bought a SmartDesk 2, follow
step 12 to 14 for SmartDesk 2 (page
10 - 11).
If you bought a SmartDesk 3, follow
step 12 to 16 for SmartDesk 3 (page
12 - 14).
9
To Next Page
Loading...
