Autool AS503 User Manual

4
From the date of receipt, we provide a three-year warranty for the main unit
and all the accessories included are covered by a one-year warranty.
Warranty access
The repair or replacement of products is determined by the actual break-
down situation of product.
It is guaranteed that AUTOOL will use brand new component, accessory
or device in terms of repair or replacement.
If the product fails within 90 days after the customer receives it, the
buyer should provide both video and picture, and we will bear the
shipping cost and provide the accessories for the customer to replace it
free of charge. While the product is received for more than 90 days, the
customer will bear the appropriate cost and we will provide the parts to
the customer for replacement free of charge.
●
●
●
These conditions below shall not be in warranty range
The product is not purchased through official or authorized channels.
The product breakdown because the user does not follow product
instructions to use or maintain the product.
●
●
Warranty
The probe should be wiped clean before each measurement and the
temperature of the engine must be below 60°C.
Press and hold the [ ] key for more than 2s to power on the tester.
Press [ ] for mode selection: petrol engine mode or diesel engine mode.
Press [ ] to toggle the temperature.
Submerge the probe in the oil.
Press [ ] for oil transmittance test.
The interface will display the transmittance of the oil.
Indicates [ ] when the transmittance is between 100% and 50%, [ ]
when the transmittance is between 50% and 30%, and [ ] when it is
below 30%. [ ] to indicate the current oil measurement temperature.
After the measurement is completed, press and hold the [ ] key for 2s
for shutdown the tester.
The instrument will automatically power off after 5 minutes of no activity.
●
●
●
●
●
●
●
●
●
●
Operations Instruction

Autool AS503 Specifications

General

Brand	Autool
Model	AS503
Category	Test Equipment
Language	English