Autool BT210 User Manual

need to be tightened and connected. If found
loose, please tighten it in time to ensure the safe
operation of the equipment. The external and
internal parts of the equipment in contact with
various chemical media should be frequently
treated with anti-corrosion treatment such as
rust removal and painting to improve the
corrosion resistance of the equipment and
extend its service life.
Comply with the safe operating procedure
s and
do not overload the equipment. The safety
guards of the products are complete and
reliable.
Unsafe factors are to be eliminated in time. The
circuit part should be checked thoroughly and
the aging wires should be replaced in time.
Adjust the clearance of various parts and
replace worn (broken) parts. Avoid contact with
corrosive liquids.
When not in use, please store the product in a
dry place. Do not store the product in hot,
h
umid, or non-ventilated places.
These conditions below shall not be in
warranty range
4
●
●
●
●
●
●
●
●
need to be tightened and connected. If found
loose, please tighten it in time to ensure the safe
operation of the equipment. The external and
internal parts of the equipment in contact with
various chemical media should be frequently
treated with anti-corrosion treatment such as
rust removal and painting to improve the
corrosion resistance of the equipment and
extend its
service life.
Comply with the safe operating procedures and
do not overload the equipment. The safety
guards of the products are complete and
reliable.
Unsafe factors are to be eliminated in time. The
circuit part should be checked thoroughly and
the aging wires should be replaced in time.
Adjust the clearance of various parts and
replace worn (broken) parts. Avoid contact with
corrosive liquids.
When not in use, please store the product
in a
dry place. Do not store the product in hot,
humid, or non-ventilated places.
The repair or replacement of products is
determined by the actual breakdown situation of
product.
It is guaranteed that AUTOOL will use brand
new component, accessory or device in terms of
repair or replacement.
If the product fails within 90 days after the
customer receives it, the buyer should provide
both video and picture, and we will bear the
shipping cost and provide the accessories for
the customer to replace it free of charge. While
the product is received for more than 90 days,
the customer will bear the appropriate cost and
we will provide the parts to the customer for
replacement free of charge.
The product is not purchased through official or
authorized channels.
The product breakdown because the user does
not follow product instructions to use or
maintain t
he product.
We AUTOOL pride ourselves on superb design
and excellent service. It would be our pleasure to
provide you with any further support or services.
WARRANTY
From the date of receipt, we provide a three-year
warranty for the main unit and all the accessories
included are covered by a one-year warranty.
Warranty access

Autool BT210 Specifications

General

Brand	Autool
Model	BT210
Category	Test Equipment
Language	English