SYSTEM OPERATIONS
A. 5-BUTTON TRANSMITTER OPERATION
A. ACTIVE LOCK & ARM:
1. Press button on the transmitter..
2. The horn will chirp once and parking light will flash once indicating that
the system is now armed. The vehicle doors will lock upon arming when
interfaced with the security system.
SILENT ARMING / DISARMING: Press the + button on the
transmitter will arm or disarm your security system, No chirp sound will
be heard, arm / disarm confirmation will be through the vehicles parking
lights only.
DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps, then
you have left a door, trunk, or hood lid ajar. (See Alarm Feature “I - 4
Programming)
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS:
Press the button once: The siren chirps once, The system is armed.
Press the button a second time within 5 seconds: The siren chirps
twice, the Shock Sensor is now bypassed.
The sensor bypass feature is programmed to activate for one arming
cycle only. The security system will return to normal operation during
the next arming cycle.
Transmitter
Button
System Function Remark
Lock Doors & Arm System
-
Arm and Delete The Shock
Sensor
Press twice within 5 seconds.
Car locator
System Armed
Panic function
Press and Hold for 3 seconds
Unlock Doors & Disarm System
-
Two Steps Door Unlock & Disarm
System
Press twice within 3 seconds.
+
Silent Arming / Disarming
Press both buttons together.
+
3
RD
Channel (Auxiliary)
Press both buttons together.
(Feature III-2 must be ‘ON’ 3
rd
Ch)
Channel 2 (Trunk)
Press and Hold for 2 seconds
-
Passive Arming By-Pass
Press twice while unit is Passive
Arming Or Re-Arming.
Activate Remote Start
Turn Off The Remote Start
To Next Page
Loading...
