www.autowatch.co.uk P a g e 2 o f 15
Terms and abbreviations
PIN code – this is the unique sequence of
button presses you choose and program into
the Ghost. Without entering this sequence
prior to starting, your vehicle is not going
anywhere.
Indication signal – on all Ghost installations
there is deliberately NO dash mounted
flashing LED as this would help thieves trace
the wires back to the module and
compromise security. Instead we use a model
specific dash warning light to confirm
deactivation and for programming different
features. Most commonly the left or right
indicator signal or the check-engine warning
signal are used by the Ghost as a substitute
for an external Status LED.
Service button – a single button is defined for
each vehicle that is used to put the vehicle
into service / valet mode.
Your vehicle’s service button and indication signal are:
To Next Page
Loading...
