www.autowatch.co.uk P a g e 4 o f 15
Entering your PIN code
When you take delivery of your vehicle with an
Autowatch Ghost installed, the professionally
trained installation team will have set a default PIN
code for you. This is generally simple and, for
your security, should be changed as soon as
possible after delivery.
To enter your PIN code follow these simple steps:
1. Switch on your vehicles ignition
2. Press each button in the PIN code sequence
in the correct order. Whilst getting used to the
process it is advantageous to do each press
firmly and deliberately.
3. Wait until the indication signal flashes twice
before starting your vehicle.
To Next Page
Loading...
