www.autowatch.co.uk P a g e 10 o f 15
Service / valet mode
Your Autowatch Ghost has a service / valet mode
whereby the unit will not require the PIN code to
be entered. This is used when the vehicle is being
serviced or valet parked.
Note: This mode is not meant as a permanent
override and will automatically exit when the
vehicle exceeds a speed of 30 mph for a
continuous period of 3 minutes. After this the
Ghost will need a PIN code to disarm on the next
start attempt.
To enter service / valet mode simply enter your
PIN code as normal. Once the indication signal
flashes twice press the service button 5 times.
The indication signal will flash 5 times to confirm
that your Autowatch Ghost is now in service /
valet mode.
You can manually exit service / valet mode simply
enter your PIN code at any time while the ignition
is switched on.
To Next Page
Loading...
