www.autowatch.co.uk P a g e 6 o f 15
3. Emergency code entry: - This is used if the
PIN has been forgotten or a button is no
longer working.
a. Locate your emergency 4-digit code. This is
found on your Autowatch Ghost card,
behind the scratch off security protection, or
contact Autowatch.
b. Switch on your vehicle ignition.
c. Press and hold the brake pedal
d. Press the accelerator pedal to the floor and
release it again, repeated as per the digit of
the emergency code.
e. Release the brake pedal.
f. Repeat b,c,d for the remaining 3 digits –
see flow chart on the next page for an
example for an emergency code of 1234.
g. The Autowatch Ghost will now be in learn
mode, the signal indicators will flash every 3
seconds to confirm this.
h. Do not switch your vehicles ignition off
before setting the new PIN code – See
instruction on setting a new PIN once in
learn mode.
To Next Page
Loading...
