Need help?Do you have a question about the Autronica Autroprime BS-200 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Enclosure Rating | IP30 |
| Type | Fire Alarm Control Panel |
| Networking | Yes |
| Redundancy | Optional |
| Humidity Range | 10% to 95% non-condensing |
| Communication | RS-485, Ethernet |
Provides a description of the Autroprime Interactive Fire Detection System for small-to-medium applications.
Identifies the intended audience as consultants, sales personnel, customers, and distributors.
Lists available technical documentation on the Autroprime Documentation CD-ROM.
Describes Autroprime as a stand-alone fire detection system supporting multiple loops and panels.
Details the range of applications for Autroprime, including land, agricultural, horticultural, and maritime.
Confirms Autroprime's compliance with C.E.N. EN 54, FM, and maritime SOLAS requirements.
Outlines the maximum numbers of detection loops, loop units, panels, and other system components.
Explains the zonal concept, including Detection Zones (DZ) and Alarm Zones (AZ) for alarm management.
Covers system configuration options, ready-to-use states, and service routines.
Details the SelfVerify™ function for daily inspection and verification of detectors and system components.
Explains DYFI+ digital filtering for eliminating false alarms and providing early fire detection.
Describes the BS-200 variants (BS-200, BS-200L, BS-200M) for different applications and their features.
Details the BS-210 Operator Panel, its integration, and separate mounting options.
Describes the BS-211 Repeater Panel, identical to BS-210 but without an alphanumeric keypad.
Outlines features of the BU-210 Fire Brigade Panel, including alarm display and limited operations.
Details the BV-210 Information Panel for displaying various event information without system operations.
Details the connections and functions of the Main Terminal Block J1 for loop units and power.
Describes the connections and functions of the Auxiliary Terminal Block J4 for serial interfaces and panel bus.
Lists the various functions that user configurable inputs can be assigned to.
Lists the various functions that user configurable outputs can be assigned to.
Introduces Autronica loop units supported by Autroprime, including detectors and interfaces.
Lists the Autroprime supported heat detectors: BD-200, BD-300, BD-500, BD-501.
Lists the Autroprime supported smoke detectors: BH-200, BH-300, BH-500.
Lists the Autroprime supported MultiSensors: BH-220, BH-320, BH-520.
Lists supported control and interface units, such as BN-300, BN-310, BN-320 series, and BW-200.
To Next Page
