Service Commands
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 113
14.3.2.8 Manual Test OFF - Fire Alarm Routing Equipment (FARE)
The procedure to terminate an ongoing test for Fire Alarm Routing
Equipment is similar to the procedure for Fire Alarm Devices. For
detailed description, refer to 14.3.2.7.
14.3.2.9 Manual Test OFF - Fault Warning Routing Equipment (FWRE)
The procedure to terminate an ongoing test for Fault Warning Routing
Equipment is similar to the procedure for Fire Alarm Devices. For
detailed description, refer to 14.3.2.7.
14.3.2.10 Manual Test OFF – Other Outputs
The procedure to terminate an ongoing test for other outputs is similar
to the procedure for Fire Alarm Devices. For detailed description, refer
to 14.3.2.7.
NOTE: When the test is terminated, make sure that all
extinguishers or other similar equipment are properly
connected.
To Next Page
Loading...
Need help?
General
