Need help?Do you have a question about the Autronica BS-420 and is the answer not in the manual?
General| Brand | Autronica |
|---|---|
| Model | BS-420 |
| Category | Fire Alarms |
| Language | English |
Provides essential information to operate the AutroSafe Fire Detection System.
Lists and describes the various components of the AutroSafe Fire Alarm System.
Details the functionality and sections of the primary operator panel.
Describes the functions of the repeater panel as Fire Brigade or Information.
Explains the various indicators on the operator and repeater panels.
Describes the function of all buttons on the operator and information panels.
Details the four distinct access levels for system interface controls.
Provides steps to view detailed information about specific points in alarm.
Provides steps to view detailed zonal information for selected zones.
Explains the procedure for safely resetting the fire alarm system.
Explains the various types of detection zones and their behavior.
Details the visual and audible indications on the panel during a fire alarm.
Step-by-step guide for actions to take during a fire alarm event.
Step-by-step guide for actions during a delayed fire alarm.
Step-by-step guide for actions during a fire warning event.
Details the visual and audible indications on the panel when a fault occurs.
Step-by-step guide for actions to take when a fault is detected.
Explains how to access the system's menu mode from operation mode.
Describes the layout and information presented in the menu mode display.
Provides a practical example of disabling detection zones via the menu.
Details how to view the current status of fire alarms in the system.
Details how to view the current status of system faults.
Details how to view the current status of disablements within the system.
Explains the process and implications of disabling detection zones.
Details how to disable individual points (detectors/call-points).
Step-by-step guide for executing disable commands through the menu.
Explains the process of re-enabling detection zones.
Details how to re-enable individual points.
Step-by-step guide for executing enable commands through the menu.
Provides instructions for setting or changing the system's date and time.
Explains how to enter/leave access level 3 and manage passwords.
Overview of system testing capabilities for zones and outputs.
Describes how to access and use the event log for system analysis.
Covers procedures for upgrading system software and configuration.
Specific commands for the Oil & Gas market operations.
Provides a glossary of technical terms, abbreviations, and acronyms used in the manual.
Explains the hierarchical zoning system (Detection, Alarm, Operation Zones).
To Next Page
