Autronica BS-420 - Get Measurement Values

Service Commands
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 148
14.10.4 Get Measurement Values
This menu allows you to get measurement values from gas detectors.
Step Actions to be taken Display Indication
1
To enter the Main Menu, press the Menu button
2
To select SERVICE, press 5.
3
To select OIL & GAS COMMANDS, press 8.
4
To select GET MEASUREMENT VALUES, press
4.
SE
RVIC
E
19:23
GET MEASUREMENT VALU ES
Name: _
Gas Detector Interface
Type:
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5 SERVICE
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 REPORT
5 UPGRADE
6 REMOTE ACCESS
7 DUAL SAFETY
8 OIL & GAS COMMANDS