Autronica BS-420 - Logging All Events

Service Commands
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 118
14.4.3 Logging All Events
The example below shows how to view detailed information on all
events.
Step Actions to be taken Display Indication
1
To enter the Main Menu, press the Menu button
2
To select SERVICE, press 5.
3
To select LOG, press 2.
4
To select ALL EVENTS, press 8.
5
To move to the next page (if there are several
pages), use Action Digit 2 (READ FORWARD).
To return to the previous page, use Action Digit 3
(READ BACKWARD).
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5
SERVICE
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 REPORT
5 UPGRADE
6 REMOTE ACCESS
7 DUAL SAFETY
8 OIL & GAS COMMANDS
SERVICE
1 FIRE ALARMS
2 PREALARMS
3 EARLY WARNINGS
4 FAULTS
5 DISABLE/ENABLE
6 USER OPERATIONS
7 TESTS
8 ALL EVENTS
9 LOG SETUP
19:23
LOG
SERVICE
LOG>ALL EVENTS
13:21:44 1999-01-29 Fire alarm
KITCHEN
13:20:22 1999-01-29 Fire alarm
CANTEEN
13:19:10 1999-01-29 Fire alarm
OFFICES
13:41:10 1999-01-29 Fire alarm
WORKSHOP
14:23
3: READ BACKWARD
2: READ FORWARD
SERVICE
LOG>ALL EVENTS
13:21:44 1999-01-29 Fire alarm
KITCHEN
13:20:22 1999-01-29 Fire alarm
CANTEEN
13:19:10 1999-01-29 Fire alarm
OFFICES
13:41:10 1999-01-29 Fire alarm
WORKSHOP
14:23
3: READ BACKWARD
2: READ FORWARD
OFFICES
13:41:10 1999-01-29 Fire alarm
WORKSHOP
3: READ BACKWARD
2: READ FORWARD
OFFICES
13:41:10 1999-01-29 Fire alarm
WORKSHOP
3: READ BACKWARD
2: READ FORWARD