Need help?Do you have a question about the Autronica Autro Safe BS-310 and is the answer not in the manual?
General| Brand | Autronica |
|---|---|
| Model | Autro Safe BS-310 |
| Category | Fire Alarms |
| Language | English |
Explains the purpose and scope of the installation handbook for the AutroSafe system.
Identifies the intended audience for the handbook, focusing on trained service personnel.
Lists other Autronica Fire and Security documents relevant to the system.
Specifies the environmental conditions the equipment complies with, including temperature and protection.
Details the components that make up the AutroSafe Fire Alarm Control Panel and Controller.
Provides a visual representation of how the internal components are assembled within the cabinet.
Introduces the chapter on internal cable connections and system customization.
Emphasizes safety precautions, like ensuring power is off, before making connections.
Details the location and types of fuses used in the power supply and connection modules.
Explains the importance and methods for proper shielding and earthing of cables.
Guides on connecting the mains power, batteries, and battery charging systems.
Describes how to connect external and internal AUTROLON network cables.
Provides a general overview of internal cable routing and connections within the system.
Details the connection of a temperature sensor for battery charging.
Introduces the chapter on mounting and removing I/O modules for the system.
Shows the front panel layout and indicators of an I/O module.
Provides step-by-step instructions for installing and uninstalling I/O modules.
Refers to user documentation for detailed data sheets on various I/O modules.
Details the connections and indicators for the Power Module.
Outlines the connections for the Communication Module to other system components.
Describes the connections, indicators, and schematics for loop driver modules.
Explains the connections and schematics for monitored output modules.
Details the connections and schematics for output modules with open collector outputs.
Describes the connections, monitoring resistors, and schematics for monitored input modules.
Outlines the connections for input modules with galvanic isolated inputs.
Discusses maximum cable lengths for AUTROLON rings and the need for boosters.
Specifies limits for booster placement, number of panels, and total ring length.
Illustrates the network topology for larger distributed AutroSafe systems.
Details the specific terminal connections for the AUTROLON Booster module.
Provides a general overview of how AutroMaster 5000 interfaces with AutroSafe systems.
Explains the Ethernet connection requirements for interfacing with AutroMaster 5000 via HUB or direct connection.
Describes the general application of AutroMaster 5000 and its communication with AUTROLON rings.
Illustrates system configuration using twisted pair cabling for network connections.
Shows how fibre optic cabling is used for network connections in distributed systems.
Introduces guidelines for installing and addressing loop units in the AutroSafe system.
Defines key parameters like Tag Name, Production Number, and Loop Sequence Index.
Explains how cable layout affects the availability of configuration parameters.
Provides steps for installation and configuration when the cable layout is known.
Offers steps for installation and configuration when the cable layout is unknown.
Introduces the chapter on system service and maintenance procedures.
Lists the tasks to be performed during monthly checks of the AutroSafe system.
Details the procedures for annual system inspection, testing, and restarts.
To Next Page
