Mounting
Installation Handbook, AutroSafe Interactive Fire Alarm System, Release 3, 116-P-ASAFE-FA/DE,
Rev. J, 2011-12-06,
Autronica Fire and Security AS
1.11.2 Mounting the Cabinet
The cabinet has 5 moun7ting holes located at the rear. The upper
holes are of key-hole-type.
Consult the illustration above, and do the following:
Mark and drill all the holes according to the illustation.
Partly fasten the upper screws.
Hang the cabinet onto the upper screws.
Partly fasten the bottom screws.
Tighten all screws.