Need help?Do you have a question about the Autronica BS-310 and is the answer not in the manual?
General| Brand | Autronica |
|---|---|
| Model | BS-310 |
| Category | Fire Alarms |
| Language | English |
Explains the purpose and scope of the operator's handbook for the AutroSafe system.
Defines the intended audience and required background knowledge for the handbook.
Lists related documentation for the AutroSafe system.
Introduces the operator panel and its role in the fire alarm system.
Details the indicators on the operator panel's upper and lower sections.
Explains the structure and content of the menu display.
Details the functions of the operator panel's front, alphanumeric, and utility buttons.
Explains the function and behavior of the internal buzzer.
Explains the two main modes of operation: Operation Mode and Menu Mode.
Explains the four access levels for user interface controls.
Guides users on viewing specific points in alarm state.
Explains how to access detailed information about zones in alarm.
Explains the procedure for resetting the system.
Describes how to disable alarms.
Explains various types of detection zones: Immediate, Coincidence, Delayed.
Shows the indications on the operator panel during a fire alarm.
Shows panel indications for fire alarms with a delay.
Details panel indications for fire warnings (prealarm/early warning).
Shows the operator panel indications when faults occur.
Explains how to access the system's menu mode.
Explains action digits specific to menu mode operations.
Demonstrates disabling detection zones via the menu.
Introduces the Show Status menu and its functions.
Details how to view the status of fire alarms.
Details how to view the status of system faults.
Shows how to view detection zones currently in test mode.
Details how to disable detection zones.
Explains how to disable individual points.
Guides on executing commands from the disable menu.
Details enabling detection zones.
Explains enabling individual points.
Guides on executing commands from the enable menu.
Details how to set or change the system's date and time.
Explains how to check the system's software version.
Describes how to access level 3 and manage passwords.
Explains the system's testing capabilities.
Details how to test detection zones.
Details testing of system outputs.
Details the log menu for event recording.
Covers commands related to system loops.
Covers inhibiting points for Oil & Gas applications.
Lists and defines terms and abbreviations used in the manual.
Explains the definitions of zones (Detection, Alarm, Operation).
Lists action digits and their use in Operation Mode.
To Next Page
