Autronica BS-310 - Logging All Events

Service Commands
Operator's Handbook, AutroSafe Interactive Fire Alarm System, Release 3, ASAFE-FO/FE Rev. E, 021105,
Autronica Fire and Security AS
Page 105
14.4.3 Logging All Events
The example below shows how to view detailed information on all
events.
Step Actions to be taken Display Indication
1
To enter the Main Menu, press
!
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5 SERVICE
2
To select SERVICE, press 5.
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 OIL&GAS INHIBIT
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 OIL&GAS INHIBIT
3
To select LOG, press 2.
SERVICE
1 FIRE ALARMS
2 PREALARMS
3 EARLY WARNINGS
4 FAULTS
5 DISABLE/ENABLE
6 USER OPERATIONS
7 TESTS
8 ALL EVENTS
9 LOG SETUP
19:23
LOG
4
To select ALL EVENTS, press 8.
SERVICE
LOG>ALL EVENTS
13:21:44 1999-01-29 Fire alarm
KITCHEN
13:20:22 1999-01-29 Fire alarm
CANTEEN
13:19:10 1999-01-29 Fire alarm
OFFICES
13:41:10 1999-01-29 Fire alarm
WORKSHOP
14:23
3: READ BACKWARD
2: READ FORWARD
SERVICE
LOG>ALL EVENTS
13:21:44 1999-01-29 Fire alarm
KITCHEN
13:20:22 1999-01-29 Fire alarm
CANTEEN
13:19:10 1999-01-29 Fire alarm
OFFICES
13:41:10 1999-01-29 Fire alarm
WORKSHOP
14:23
3: READ BACKWARD
2: READ FORWARD
5
To move to the next page (if there are several
pages), use Action Digit 2 (READ FORWARD).
To return to the previous page, use Action Digit
3 (READ BACKWARD).
OFFICES
13:41:10 1999-01-29 Fire alarm
WORKSHOP
3: READ BACKWARD
2: READ FORWARD
OFFICES
13:41:10 1999-01-29 Fire alarm
WORKSHOP
3: READ BACKWARD
2: READ FORWARD
Comments:
If the event log consists of one page or less, the
READ FORWARD / BACKWARD buttons will
reverse the order of the events.
You can also scroll up and down with the arrow
buttons (6 and 9).
www.ukpanels.com