Installation Handbook, AutroSafe Interactive Fire Alarm System, Release 3, 116-P-ASAFE-FA/DE,
Rev. J, 2011-12-06,
Autronica Fire and Security AS
Table of Contents
1. Introduction ....................................................................... 6
1.1 About the Handbook .......................................................................... 6
1.2 The Reader ....................................................................................... 6
1.3 Reference Documentation................................................................. 7
1.4 Environmental Requirements ............................................................ 8
1.5 Equipment List ................................................................................... 8
1.6 Assembly Drawing ............................................................................. 9
Mounting ................................................................................. 10
1.7 Introduction ........................................................................................ 10
1.8 Location ............................................................................................. 10
1.9 Mounting Height / Space Requirement ............................................. 10
1.10 Cabinet Dimensions .......................................................................... 11
1.11 Surface Mounting .............................................................................. 12
1.11.1Removing the Front Panel ...................................................... 12
1.11.2Mounting the Cabinet .............................................................. 14
1.11.3Cable Inlets / Outlets ............................................................... 15
1.11.4Cable Connections .................................................................. 15
1.11.5Mounting the Batteries ............................................................ 16
1.11.6Reassembling the Front Panel ................................................ 16
1.12 Flush Mounting in a Wall ................................................................... 18
1.12.1Removing the Front Panel ...................................................... 18
1.12.2Removing the Mounting Plate ................................................. 18
1.12.3Flush Mounting Before Construction of the Wall .................... 19
1.12.4Cut Out Dimensions ................................................................ 20
1.12.5Mounting the Cabinet .............................................................. 20
1.12.6Reassembling the Mounting Plate .......................................... 20
1.12.7Cable Inlets / Outlets ............................................................... 21
1.12.8Cable Connections .................................................................. 21
1.12.9Mounting the Batteries ............................................................ 21
1.12.10Reassembling the Front Panel ............................................. 21
1.12.11Mounting Several Panels in a 19'' Rack ............................... 21
2. Internal Cable Connections ............................................. 22
2.1 Introduction ........................................................................................ 22
2.2 Before Connecting Cables ................................................................ 22
2.3 Location of Fuses .............................................................................. 23
2.3.1 Fuses on Power Supply, BSS-103A/02 .................................. 23
2.3.2 Fuses on Connection Module, BSF-310B .............................. 24
2.4 Shielding and Earthing ...................................................................... 25
2.4.1 Introduction ............................................................................. 25
2.4.2 Definitions ............................................................................... 25
2.5 Power Supply and Battery Connections ............................................ 25
2.5.1 Connecting 230 VAC to Power Supply BSS-103A/02 ............ 25
2.5.2 Connecting the Batteries to Connection Module and
Power Supply .......................................................................... 27
2.6 Connecting the Network Cables (AUTROLON) ................................ 29
To Next Page
Loading...
