Autronica BS-420 - View Upgrade Status

Service Commands
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 137
14.7.5 View Upgrade Status
This menu allows you to view the status of any of the above
commands, including; Upgrade SW, Upgrade Config, Export Config
and Export Log.
Step Actions to be taken Display Indication
1
To enter the Main Menu, press the Menu button
2
To select SERVICE, press 5.
3
To select UPGRADE, press 5.
4
To select VIEW UPGRADE STATUS, press 5.
MENU
19:
23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4
SYSTEM
5
SERVICE
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 REPORT
5 UPGRADE
6 REMOTE ACCESS
7 DUAL SAFETY
8 OIL & GAS COMMANDS
SERVICE
1 UPGRADE SW
2 UPGRADE CONFIG
3 EXPORT CONFIG
4 EXPORT LOG
5 VIEW UPGRADE STATUS
6 REBOOT SYSTEM
19:23
UPGRADE
NOTE:
Always enter the menu “View Upgrade Status” to follow the
progress and verify that the procedure is completed.