Service Commands
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 129
14.6.2 Polluted
This command allows you to list all detectors that have been reported
as polluted.
Step Actions to be taken Display Indication
To enter the Main Menu, press the Menu button
To select SERVICE, press 5.
To select REPORT, press 4
To select Polluted, press 2
Comments: In this example one detector has been reported
as polluted
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5
SERVICE
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 REPORT
5 UPGRADE
6 REMOTE ACCESS
7 DUAL SAFETY
8 OIL & GAS COMMANDS
SERVICE
19:23
4: PRINT
REPORT POLLUTED
1 Heat Detector1
To Next Page
Loading...
