Autronica BS-420 - Show Status - Oil & Gas Inhibited Points

Show Status
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 75
10.10 Show Status - Oil & Gas Inhibited Points
This menu is specifically related to the Oil & Gas Market, and gives
detailed information on the Oil & Gas inhibited points.
Step Actions to be taken Display Indication
1
To enter the Main Menu, press the Menu button
2
To select SHOW STATUS, press 1.
3
To select OIL & GAS INHIBITED POINTS, press
8.
4
To move the cursor to the desired selection,
scroll with the arrow buttons
5
To view detailed zonal information for the
selected inhibited point, press
6
To view inhibited point(s) for the selected
detection zone, press Action Digit 1 (SHOW
POINTS).
7
To return (each step backwards), press the
Close Window button
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5 SERVICE
SHOW STATUS
1 FIRE ALARMS
2 FIRE WARNINGS
3 FAULTS
4 DISABLEMENTS
5 DETECTION ZONES IN TEST
6 ACTIVATED OUTPUTS
7 ACTIVE SENSORS
8 OIL&GAS INHIBITED POINTS
19:23