Autronica BS-420 - Set Alarm Limits

Service Commands
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 146
14.10.3 Set Alarm Limits
The Set Alarm Limits command allows you to change a gas detector’s
alarm limit for Low Alarm and High Alarm.
Step Actions to be taken Display Indication
1
To enter the Main Menu, press the Menu button
2
To select SERVICE, press 5.
3
To select OIL & GAS COMMANDS, press 8.
4
To select SET ALARM LIMITS, press 3.
SERVICE
19:23
SET ALAR M L
IMITS
Name
: _
Gas
Detector I
nterface
Type:
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5 SERVICE
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 REPORT
5 UPGRADE
6 REMOTE ACCESS
7 DUAL SAFETY
8 OIL & GAS COMMANDS