●Installing the remote controller batteries
1.Slide to open the battery cover according to the direction indicated by the arrowhead.
2.Insert two brand new batteries (AAA), and position the batteries to the right electric poles (+＆ ).-
3.Put back the battery cover.
Selects the operation mode.
Page 4
MODE selector button
●
Signal transmitter
Distance of signal: About 8m.
●
TEMPERATURE button
SWING button
Changes the temperature
setting.
●
Adjusts the airflow direction.
●
DIRECTION button
Selects different modes in mode
●
Left and right airflow direction
Up and down airflow direction
ON/OFF button
Press this button once to start operation.
Press once again to stop it.
●
MENU button
Enter the function selection mode.
●
OK button
Confirm the function.
●
SPEED button
Selects the airflow rate setting. Page 5
●
TIMER button
Enter the timer function setting. Page 6
●
SOFT button
Enter soft function. Page 5
●
Operation display section
Preparation before Operation
3
To Next Page
Loading...
