DISPLAY / SLEEP / I-FEEL / ICLEAN /HEALTH /
ECO /ELE.H / ANTI-F Operation
In function selection mode, the character in LCD will be flashing when the function be selected.
2.SLEEP function
When the air conditioner is on, select this function to activate.
After entering the sleep function, the air conditioner automatically adjusts the operating
temperature and wind speed, and turns off the lights.
The unit will exit function after 10 hours of continuous operation and restore to the previous status.
Note: The sleep function cannot be activated in fan or auto mode.
1.DISPLAY function
When the air conditioner is on, select this function.
The air conditioning display screen will turns off or on.
Mode Selection
1.Press to enter the function selection mode.
2.Then press , , and button to choose the function which you want.
3.After press button, turn on this function.
4.ICLEAN function
When the air conditioner is off, select this function to activate.
The unit will automatically clean the dust on the evaporator and dry or blow-dry the moisture.
The cleaning function will automatically shut off after 30 minutes.
During the cleaning function, if the button is pressed, the unit will turn on immediately.
6.ECO function
When the air conditioner is on and in the COOL mode, select this function to activate.
The variable frequency air conditioner will enter the ECO function, which consumes the least
electricity, and will automatically exit after 8 hours. The ECO function is not available on fixed
frequency air conditioners. Changing modes or turning off the air conditioner will automatically
cancel the ECO function.
Note: The electricity consumption is affected by the ambient temperature and the house
structure etc., and when the ambient temperature is high or the house has a large area, be
cautious to use the ECO function.
7.ELE.H function
When the air conditioner is on and in the HEAT mode, select this function to activate.
The unit will activate the auxiliary heating function automatically according to the ambient
temperature, so as to accelerate the heating.
Note: US models do not have this feature.
8.ANTI-F function
When the air conditioner and remote are off, select this function to activate. Upon activation,
After each shutdown, the air conditioner automatically starts to operate for about 3 minutes
to dry the moisture on the evaporator. This prevents the accumulation of bacteria, which can
cause fungus, unpleasant odors, and potential health issues.
Note: If you need to turn off this function, you need to press the ANTI-F function again.
3.I-FEEL function
When the air conditioner is on, select this function to activate.
The air conditioner intelligently detects the temperature at the user's location and adjusts its
operation accordingly. It first sets the average room temperature, then fine-tunes it based on the
temperature around the user's position.
5.HEALTH function
When the air conditioner is on, select this function to activate.
After activating the health function, the air conditioner will activate modules such as UVC to
purify the air.
Note: The health function will be automatically canceled when the air conditioner is turned off.
This function is combined with the functions of air conditioning, and some products do not
have this function
7
To Next Page
Loading...
