How to fix communication error between AUX Inverter outdoor and indoor unit?
If you're experiencing a communication error between the outdoor and indoor units of your AUX Inverter, the first step is to check the wiring and connections between these units to ensure they are properly connected.
What to do if my AUX Inverter has a drainage fault?
If your AUX Inverter is experiencing drainage issues, clear any blockages in the drainage system to ensure proper water flow.
How to troubleshoot over-voltage or low voltage protection fault on AUX Inverter?
If your AUX Inverter is showing an over-voltage or low voltage protection fault, check the electrical supply voltage to ensure it is within the correct range.
What causes a low pressure fault in AUX Inverter and how to fix it?
If your AUX Inverter indicates a low pressure fault, check the refrigerant levels to ensure they are adequate for proper operation.
How to fix fault with the fan motor of outdoor unit in AUX Inverter?
If you're having trouble with the fan motor of the outdoor unit of your AUX Inverter, check the outdoor fan motor to ensure it is functioning correctly.
What to do if AUX Inverter compressor fails to start?
If your AUX Inverter is experiencing issues with the compressor start, check the compressor start relay.
How to fix a fault with the high pressure switch on AUX Inverter?
If you encounter a fault with the high pressure switch in your AUX Inverter, check and replace the high pressure switch as needed.
How do I troubleshoot the anti-frozen protection fault on my AUX Inverter?
If your AUX Inverter shows a fault with anti-frozen protection of the indoor unit in heating mode, check for airflow blockages.
What to do if temperature sensor (Tcm) on AUX Inverter outdoor unit is faulty?
If your AUX Inverter is showing a fault with the temperature sensor on the outdoor unit, replace the temperature sensor.
How to fix a fault with the temperature sensor (Ticm) on the indoor unit of AUX Inverter?
If your AUX Inverter indicates a fault with the temperature sensor on the indoor unit, replace the indoor temperature sensor.
General| Voltage | 220-240V |
|---|---|
| Noise Level | 50 dB |
| Type | Split |
| Noise Level (Outdoor) | 50 dB |
| Features | Auto Restart, Sleep Mode |
| Warranty | Varies by region |
Illustrates the electrical principle diagram for Wall Mounted indoor units.
Shows the electrical principle diagram for Cassette indoor units.
Presents the electrical principle diagram for Ceiling Floor indoor units.
Details the electrical principle diagram for Duct indoor units.
Illustrates the electrical principle diagram for Outdoor Units.
Introduces standard and optional wired controllers for different indoor unit types.
Explains how to set indoor unit parameters using remote or wired controllers.
Lists necessary spare parts and tools required before installation.
Outlines safety precautions and critical considerations for installation.
Details installation steps, spacing, hoisting, and sterilization net fitting.
Covers installation drawing and distance requirements for Cassette units.
Covers piping precautions, specifications, connection, and length conversion.
Explains the process of emptying and vacuuming the system before charging refrigerant.
Covers electrical connection precautions, wire specifications, and diagrams.
Lists error codes displayed on the board and their corresponding descriptions.
Provides troubleshooting flowcharts for common communication and protection failures.
To Next Page
