AUX L - Page 20

EN
Note： If the configuration fails or you change the password of wireless router,
you need to reset the WIFI module to reconnect: Turn on the power of the
module, then repeat the steps above for APP configuration.
2.AC Management
2.1 Modify AC name and locking function
2.2 For other instructions, please refer to "HELP" in APP.
2.3 Remote-control device
Connect the wireless router to internet, then open the GPRS. It means the remote
control device, voice control function only effective after connected to the Internet.
3.Troubleshooting
If unable to properly configured or connect the WIFI box:
a) Make sure the WIFI box for wiring is properly connected.
b) Long press WIFI box 8 seconds to reconfigure the positive button.
If the problem can't be solved, please contact after sales person.
Device list
Air-conditioner
Add device ©
Modify the name
©
Locking^evice
Mac b4:43:0d:a5:b2
s
Note:
If you had locked AC equipment, you need to
unlock before connecting other mobile terminal.
If the mobile terminal locked AC was accidentally
lost, you need to reset WIFI module first, and
then use the new mobile terminal to connect
(Reset step is same with 1.3 APP configuration).
4. Technical Parameters
■Working temperatue: CT50°C;
■ Working environment humidity: 20~90%RH ;
■ Dimensions: 78 X 52 X 15. 5
■ Configuration cable wire length： 1500mm
9