Special Operation
Special Operation Functions
MODE
TIMERHEAT
1. / function℃ ℉
The default display unit for temperature is based on the actual product.
Press the and buttons at the same time above 3 seconds, you can set the “ ” or “ ”.
F
C
2.Child-lock function
Press the and buttons at the same time and hold for at least 3 seconds to
activate or deactivate the child-lock function.
Then other buttons cannot be used.
Only in the heating mode and in the power-on state.
Press the and buttons at the same time above 3 seconds to turn on or off the function.
After turning on the function:
a.Switch to mode, or select the sleep function, all can exit 8℃ heating function.
b.Press any of the , , button is non-effective.
c.Turn the unit off and on again, 8℃ heating function is still retained.
d.Press the button, ELE.H function is not selectable.
3. 8°C heating function
at the same time
above 3 seconds
at the same time above 3 seconds
at the same time
above 3 seconds
COOL
HEAT
COOL
HEAT
HEAT
MODE
MODE
SPEED
MODE
COOL
+
-
SPEED
ON/OFF
MODE
TIMERHEAT
MENU
OK
L/R
SWING
U/D
SWING
RUN
HEAT
FAN
SILENCE
ELE.H
iCLEAN
SPEED AUTO TURBO
HOUR
ON OFF
AUTO
COOL
DRY
HEALTH
ECO
SLEEP
DISPLAY
LIGHT
I-FEEL
Anti-F
When the outdoor temperature is low (usually below zero degrees), this function will keep the
indoor temperature within the range of 8℃ to prevent indoor temperatures from dropping
below zero degrees and freezing.
SPEED AUTO TURBO
RUN
HOUR
ON OFF
SPEED AUTO TURBO
RUN
HOUR
ON OFF
SPEED AUTO TURBO
RUN
HOUR
ON OFF
8