17
Finishing the Water Cooler Installation
3. Locate the Valve and Tube Assembly.
Connect the tube end of this assembly to the
left insert on the left Filter Adapter.
5. Using the Small PE Tubing, connect the
right side inlet of the first Filter Adapter
to the left side inlet of the second Filter
Adapter.
4. Connect the PE Tubing (20’), that is connected
to the water source, to the open end of the Valve
and Tube Assembly. Make sure that the valve
is in the o position (perpendicular to the PE
Tubing).
Getting Started
To Next Page
Loading...
