14
Activate Heating and Cooling
To activate the cold water, push the cooling switch (#15) into the on (I) position by
pushing the top of the switch in. If you do not wish to have cold water you can leave
the switch in the o (O) position.
To activate the hot water, push the heating switch (#16) into the on (I) position by pushing
the top of the switch in. If you do not wish to have hot water you can leave the switch
in the o (O) position.
Please allow 15 minutes for the hot water to be heated. During this time the heating indicator
light (#2) will be steady. The light will turn o when the heating process is complete. Please allow
1 hour for the cold water to be cooled. During this time the cooling indicator light (#3) will be
steady. The light will be turned o when the cooling process is complete. If any error occurs
in the heating or cooling process, the indicator light will blink.
Before turning on the heating (#16) or cooling (#15) switches, ensure water is already filling inside
the inner tanks by dispensing a drop of water from the water spout (#10).
Getting Started
English
To Next Page
Loading...
