18
Refilling the Bottle
Notice: Do not dispense hot, cool or cold water if the light is flashing as you could empty the
tanks and cause the dispenser to overheat.
When the empty bottle indicator light (#4) is blinking red this is an alert that your bottle
is empty and will need to be refilled as soon as possible.
1. Open the cabinet door.
2. Slide the empty bottle out of the cabinet.
4. It is recommended to insert the provided
water bottle filter funnel into the neck of the
5 gallon water bottle while filling to ensure
that no large particles enter the 5 gallon
water bottle that can clog the machine’s
water pump.
3. Remove the probe assembly from the empty
bottle. Place probe assembly on the probe
hanger.
User Guide and Maintenance
English
To Next Page
Loading...
